Advanced Configuration

Coralogix offers Kubernetes Observability using OpenTelemetry for comprehensive Kubernetes and application observability. This tutorial will guide you through advanced configuration options for Kubernetes clusters.

For basic configuration, view our tutorial here.

Prerequisites

• Kubernetes v1.24+ installed, with the command-line tool kubectl

• Helm v3.9+ installed and configured

Overview

The OpenTelemetry Integration Chart utilizes the values.yaml file as its default configuration. This configuration is based on the OpenTelemetry Collector Configuration for both the OpenTelemetry Agent Collector and OpenTelemetry Cluster Collector.

Default configuration

STEP 1. Create a new YAML-formatted override file that defines certain values for the OpenTelemetry Integration Chart.

The following global values are the minimum required configurations to getting the chart working:

# values.yaml
global:
  domain: "<coralogix-endpoint>"
  clusterName: "<k8s-cluster-name>"

• Input the following values:

  • domain: Choose the OpenTelemetry endpoint for the domain associated with your Coralogix account.

  • clusterName: You are also required to specify as a cluster identifier.

• You also may copy all or any other configurations from the repository values.yaml file.

• If you'd like to provide your own overrides for an array values such as extraEnvs, extraVolumes or extraVolumeMounts, be aware that Helm does not support merging arrays. Instead, arrays are nulled out.

• In case you'd like to provide your own values for these arrays, first copy over any existing array values from the provided values.yaml file.

STEP 2. Save this file as values.yaml

STEP 3. Install with the helm upgrade --install command

helm upgrade --install otel-integration coralogix-charts-virtual/otel-integration -f values.yaml -n $NAMESPACE

Optional configurations

Enabling dependent charts

The OpenTelemetry Agent is primarily used for collecting application telemetry, while the OpenTelemetry Cluster Collector is primarily used to collect cluster-level data. Depending on your requirements, you can either use the default configuration that enables both components, or you can choose to disable either of them by modifying the enabled flag in the values.yaml file under the opentelemetry-agent or opentelemetry-cluster-collector section as shown below:

...
opentelemetry-agent:
  enabled: true
  mode: daemonset
...
opentelemetry-cluster-collector:
  enabled: true
  mode: deployment

Installing the chart on clusters with mixed operating systems (Linux and Windows)

Installing otel-integration is also possible on clusters that support running Windows workloads on Windows node alongside Linux nodes (such as EKS, AKS or GKE). The kube-state-metrics and collector will be installed on Linux nodes, as these components are supported only on Linux operating systems. Conversely, the agent will be installed on both Linux and Windows nodes as a daemonset, in order to collect metrics for both operating systems. In order to do so, the chart needs to be installed with few adjustments.

Adjust the Helm command in STEP 10 of the basic configuration to use the values-windows.yaml file as follows:

helm upgrade --install otel-coralogix-integration coralogix/otel-integration -n $NAMESPACE -f values-windows.yaml --set global.domain="coralogix.com" --set global.clusterName="<cluster name>"

Service pipelines

The OpenTelemetry Collector Configuration guides you to initialise components and then add them to the pipelines in the service section. It is important to ensure that the telemetry type is supported. For example, the prometheus receiver documentation in the README states that it only supports metrics. Therefore, the following prometheus receiver can only be defined under receivers and added to the metrics pipelines in the service block to enable it.

opentelemetry-agent:
...
    config:
        receivers:
            prometheus:
        config:
          scrape_configs:
            - job_name: opentelemetry-infrastructure-collector
              scrape_interval: 30s
              static_configs:
                - targets:
                    - ${MY_POD_IP}:8888

        ...
      service:
        pipelines:
                logs:
                    ...
                metrics:
                    receivers:
                    - prometheus
          traces:
                        ...

Coralogix exporter

In both charts, you have the option to configure the sending of logs, metrics, and / or traces to Coralogix. This can be done by configuring the Coralogix Exporter for different pipelines. The default values.yaml file includes all three options, but you can customize it by removing the coralogix exporter from the pipelines configuration for either logs, metrics, or traces.

The following opentelemetry-agent exporter configuration also applies to the opentelemetry-cluster-collector:

global:
  domain: "<coralogix-domain>"
  clusterName: "<cluster-name>"
  defaultApplicationName: "otel"
  defaultSubsystemName: "integration"
...
opentelemetry-agent:
...
  config:
    ...
    exporters:
      coralogix:
        timeout: "30s"
        private_key: "${CORALOGIX_PRIVATE_KEY}"
                ## Values set in "global" section
        domain: "{{ .Values.global.domain }}"
                application_name: "{{ .Values.global.defaultApplicationName }}"
        subsystem_name: "{{ .Values.global.defaultSubsystemName }}"
    service:
      pipelines:
        metrics:
          exporters:
            - coralogix
                            ...
        traces:
          exporters:
            - coralogix
                            ...
        logs:
          exporters:
            - coralogix

OpenTelemetry Agent

The OpenTelemetry Agent is enabled and deployed as a daemonset by default. This creates an Agent pod per node. Allowing the collection of logs, metrics, and traces from application pods to be sent to OpenTelemetry pods hosted on the same node and spreads the ingestion load across the cluster. Be aware that the OpenTelemetry Agent pods consumes resources (e.g., CPU & memory) from each node on which it runs.

opentelemetry-agent:
  enabled: true
  mode: daemonset

Agent presets

The multi-instanced OpenTelemetry Agent can be deployed across multiple nodes as a daemonset. It provides presets for collecting host metrics, Kubernetes attributes, and Kubelet metrics. When logs, metrics, and traces are generated from a pod, the collector enriches them with the metadata associated with the hosting machine. This metadata is very useful for linking infrastructure issues with performance degradation in services.

For more information on presets, refer to the Configuration of OpenTelemetry Collector.

# example
opentelemetry-agent:
...
   presets:
    # LogsCollection preset enables a configured filelog receiver to read all containers’ logged console output (/var/log/pods/*/*/*.log).
    logsCollection:
      enabled: true
    # KubernetesAttributes preset collects Kubernetes metadata such as k8s.pod.name, k8s.namespace.name, and k8s.node.name. It also adjusts the ClusterRole with appropriate RBAC roles to query the Kubernetes API.
    kubernetesAttributes:
      enabled: true
    # HostMetrics preset enables collection of host metrics, involving CPU, memory, disk and network.
    hostMetrics:
      enabled: true
      # Process preset adds collection of host processes.
      process:
        enabled: true
    # KubeletMetrics enables the kubeletstats receiver to collect node, pod and container metrics from the Kubernetes API. It also adjusts the ClusterRole with appropriate RBAC roles.
    kubeletMetrics:
      enabled: true

For example, enabling the kubeletMetrics preset to true will add configuration kubeletstats receiver that will pull node, pod, container, and volume metrics from the API server of the host’s kubelet. It will send it down metric pipeline.

# example
receivers:
    kubeletstats:
        auth_type: serviceAccount
        collection_interval: 20s
        endpoint: ${K8S_NODE_NAME}:10250

Receivers

Once configured, you will be able to send logs, metrics, and traces to be collected in the OpenTelemetry Agent pods before exporting them to Coralogix.

To achieve this, you need to first instrument your application with OpenTelemetry SDKs and expose the Collector to a corresponding receiver. It is recommended to use the OTLP receiver (OpenTelemetry protocol) for transmission over gRPC or HTTP endpoints.

The daemonset deployment of the OpenTelemetry Agent also uses hostPort for the otlp port, allowing agent pod IPs to be reachable via node IPs, as follows:

# K8s daemonset otlp port config
ports:
- containerPort: 4317
  hostPort: 4317
  name: otlp
  protocol: TCP

The following examples demonstrate how to configure an Auto-Instrumented JavaScript application to send traces to the agent pod’s gRPC receiver.

STEP 1. Set the Kubernetes environment variables of the JavaScript application’s deployment/pod as in the example below. Define the OTEL_EXPORTER_OTLP_ENDPOINT as the configured NODE_IP and OTLP_PORT. Configure OTEL_TRACES_EXPORTER to send in the otlp format. Choose OTEL_EXPORTER_OTLP_PRO as grpc.

# kubernetes deployment manifest's env section
spec:
  containers:
        ...
    env:
  - name: NODE_IP
    valueFrom:
      fieldRef:
        fieldPath: status.hostIP
  - name: OTLP_PORT
    value: "4317"
  - name: OTEL_EXPORTER_OTLP_ENDPOINT
    value: "http://$(NODE_IP):$(OTLP_PORT)"
  - name: OTEL_TRACES_EXPORTER
    value: "otlp"
    - name: OTEL_EXPORTER_OTLP_PROTOCOL
    value: "grpc"

STEP 2. By default the agent has the otlp receiver configured as follows:

# collector config
receivers:
  otlp:
    protocols:
      grpc:
        endpoint: ${MY_POD_IP}:4317
      http:
        endpoint: ${MY_POD_IP}:4318

Processors

Processors are generally used to process logs, metrics, and traces before the data is exported. This may include, for example, modifying or altering attributes or sampling traces.

In the example below, a k8sattributes processor is used to automatically discovers k8s resources (pods), extract metadata from them and add the extracted metadata to the relevant logs, metrics and spans as resource attributes.

# default in values.yaml
processors:
    k8sattributes:
    filter:
      node_from_env_var: KUBE_NODE_NAME
    extract:
      metadata:
        - "k8s.namespace.name"
        - "k8s.deployment.name"
        - "k8s.statefulset.name"
        - "k8s.daemonset.name"
        - "k8s.cronjob.name"
        - "k8s.job.name"
        - "k8s.pod.name"
        - "k8s.node.name"

• More information can be found in the Kubernetes Attributes Processor README.

OpenTelemetry Cluster Collector

Enable the opentelemetry-cluster-collector by setting enabled to true.

opentelemetry-cluster-collector:
  enabled: true
  mode: deployment

Cluster collector presets

The cluster collector is best suited to enable presets such as Kubernetes Events and Cluster Metrics. A smaller instance count of the deployment is sufficient to query the Kubernetes API.

    presets:
    clusterMetrics:
      enabled: true
    kubernetesEvents:
      enabled: true
    kubernetesExtraMetrics:
      enabled: true

For example, if you enable the kubernetesEvents preset, the Kubernetes objects receiver configuration will be added dynamically during the Helm installation. This configuration enables the collection of events.k8s.io objects from the Kubernetes API server.

Kubernetes events: reducing the amount of collected data

When collecting Kubernetes events using the cluster collector, it is common for the number of events to reach millions, especially in large clusters with numerous nodes and constantly scaling applications. To collect only the relevant data, you can use the following settings.

Cleaning data

By default, a transform processor named transform/kube-events is configured to remove some unneeded fields from Kubernetes events collected. You may override this or alter the fields as desired.

processors:
    transform/kube-events:
      log_statements:
        - context: log
          statements:
            - keep_keys(body["object"], ["type", "eventTime", "reason", "regarding", "note", "metadata", "deprecatedFirstTimestamp", "deprecatedLastTimestamp"])
            - keep_keys(body["object"]["metadata"], ["creationTimestamp"])
            - keep_keys(body["object"]["regarding"], ["kind", "name", "namespace"])

Filtering Kubernetes events

In large-scale environments, where there are numerous events occurring per hour, it may not be necessary to process all of them. In such cases, you can use an additional OpenTelemetry processor to filter out the events that do not need to be sent to Coralogix.

Below is a sample configuration for reference. This configuration filters out any event that has the field reason with one of those values BackoffLimitExceeded|FailedScheduling|Unhealthy.

processors:
  filter/kube-events:
    logs:
      log_record:
        - 'IsMatch(body["reason"], "(BackoffLimitExceeded|FailedScheduling|Unhealthy)") == true'

Collecting only warning events

Currently, Kubernetes has two different types of events: Normal and Warning. As we have the ability to filter events according to their type, you may choose to collect only Warning events, as these events are key to troubleshooting. One example could be the use of a filter processor to drop all unwanted Normal-type events.

processors:
  filter/kube-events:
    logs:
      log_record:
        - 'IsMatch(body["object"]["type"], "Normal")'

Resource Catalog

The Coralogix Resource Catalog can be used to monitor the various resource types within your Kubernetes clusters. It collects component details and lets you observe performance metrics and review logs of the associated components. Data for this feature comes from multiple sources. There are several presets that can be used to enable these features.

Kubernetes resources preset

This preset enables the scrape of the Kubernetes API to populate your Kubernetes resource inventory. It uses the k8sobjects receiver and collects objects as defined in this configuration, uses a processor to enrich the collected objects, and exports it with a customized coralogix/resource_catalog exporter.

This preset needs to be enabled only in the cluster-collector configuration.

  presets:
    .
    .
    kubernetesResources:
      enabled: true

Host details presets

The last two presets collect important host information to enrich the catalog. This data is collected by the agent nodes and consists of host entity events and processes collected by hostmetrics receiver. While the hostEntityEvents preset is required, the hostMetrics.process preset is optional.

  presets:
    .
    .
    hostEntityEvents:
      enabled: true

Kubernetes infrastructure monitoring

If you already have an existing log shipper (such as, Fluentd, Filebeat) in place and your goal is to monitor all Kubernetes elements of your cluster, follow these steps to enable only the necessary collection of metrics and Kubernetes events to be sent to Coralogix.

STEP 1. Copy the following into a YAML-formatted override file and save as values.yaml.

global:
  domain: "<coralogix-endpoint>"
  clusterName: "<k8s-cluster-name>"

opentelemetry-agent:
  presets:
    logsCollection:
      enabled: false
  config:
    exporters:
      logging: {}
    receivers:
      zipkin: null
      jaeger: null

    service:
      pipelines:
        traces:
          exporters:
            - logging
          receivers:
            - otlp
        logs:
          exporters:
            - logging
          receivers:
            - otlp

STEP 2. Install with the helm upgrade --install command.

helm upgrade --install otel-integration coralogix-charts-virtual/otel-integration -f values.yaml -n $NAMESPACE

Next steps

Validation instructions can be found here.

Additional resources

Support

Need help?

Our world-class customer success team is available 24/7 to answer any questions that may come up.

Feel free to reach out to us via our in-app chat or by sending us an email at [email protected]

Previous Kubernetes Complete Observability: Basic Configuration

Next Validation

Theme

Light

light

dark