Set up a connector as part of Notification Center and manage existing connectors.

1. Navigate to **Integrations**, then **Notification Center**. Select the destination type as the basis for your notification.

1. In the **Connectors** tab, select **Create new connector**.

1. Define the connector configuration in the popup modal that appears.

   - [Generic HTTPS](https://coralogix.com/docs/user-guides/notification-center/connectors/configuration-https/index.md)
   - [PagerDuty](https://coralogix.com/docs/user-guides/notification-center/connectors/configuration-pagerduty/index.md)
   - [Slack](https://coralogix.com/docs/user-guides/notification-center/connectors/configuration-slack/index.md)

1. (Optional) To use dynamic templating, define the notification source type (referred to as **Entity**) for which the connector is being configured. Select **+ Entity type** and then select the source type from the dropdown menu. If defined, this allows using dynamic templating with [Tera](https://keats.github.io/tera/docs/) to configure certain fields in the schema. If you do not define the source type, only static values can be entered in the connector configuration.

1. Once complete, select **Test connector**. This sends a test notification to the channel selected.

## Next steps

[Managing connectors](https://coralogix.com/docs/user-guides/notification-center/connectors/management/) [Advanced configuration](https://coralogix.com/docs/user-guides/notification-center/connectors/advanced-configuration/) [Destination types](https://coralogix.com/docs/user-guides/notification-center/destination-types/introduction/)